Parkside PHD 100 C2 User Manual download pdf (Page 47)

47

GB

E

Fixing the Wheels

The back wheels on the chassis (9) can be

-

er against undesired rolling away.

• To do this push the two bolts (16) out-

wards and downwards.

The wheels are now no longer able to

turn.

 

two bolts (16) upwards.

F

Removing the Chassis

The pressure washer can also be used

without the chassis (9).

• Press the release button (18) on the

front locking point. Hold the chassis (9)

securely in the front area and pull the

pressure washer upwards.

At the same time, tilt the pressure

washer slightly to the rear.

• To reinstate, insert the device into the

rear area of the chassis (9). Push down

on the device down and press the re-

lease button (18) at the same time. The

device clicks into the chassis.

Cleaning and Mainte-

nance

Pull out the power plug before

every maintenance operation. There

is a risk of electrocution or of injury

from moving parts.

Cleaning

Never direct the water jet

against the washer, nor clean



water. This could give rise to

the danger of electric shock

and damage the washer! .

Always keep the washer clean. Do

not use any detergents or solvents.

• Always keep the ventilation slots clean

and free.

• Only clean the pressure washer with a

soft brush or a slightly moist cloth.

• In case a nozzle of the jet tube

(12/13) is clogged up, use the nozzle

cleaning pin (15) to remove the object

from the nozzle.

G

If necessary, take off the water con-





Maintenance

The pressure washer is maintenance free.

Ask our service centre to carry out

any work that is not described in

these instructions. Use only original

parts.

Storage

• Drain all the water from the pressure

washer. Disconnect the unit from the

water supply. Press the On/Off switch

(

A

5) to turn on the pressure washer

for no longer than 1 minute until no

more water escapes from the high-

pressure connection (

A

5). Turn off the

unit.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 56 57

Comments to this Manuals

No comments