Parkside Pipe Cleaning Set User Manual download pdf (Page 26)

26

GB

Operating pressure / Rated pressure .max.

110 bar / 11 MPa

Pressure ................max. 160 bar / 16 MPa

Max. pumping rate, water........... 450 l/h

Technical and optical changes can be

carried out in the course of further develop-

ment without notice. All dimensions, refer-

ences and information of this instruction

manual are therefore without guarantee.

Legal claims, which are made on the basis

of the instruction manual, cannot thus be

considered as valid.

Safety information

Please also observe the safety in-

structions for your pressure washer.

To avoid accidents and injuries:

Pressure washers can be dan-

gerous if used incorrectly. Do

not direct the jet at people, an-

imals, live electrical equipment

or the equipment itself.

• The device must not be used by people

(including children) with limited physical,

sensory or mental faculties or who lack

the necessary experience and/or know-

ledge - other than they are supervised

by a person responsible for safety or are

being instructed to operate the appliance

by such a person.

• Children must be supervised in order

to ensure that they do not play with the

equipment.

• Operation of the equipment is not per-

mitted for people under the age of 16.

• Wear goggles to protect your eyes

against loose dirt while working.

• To avoid damage and personal injury,

only use the unit on leak-tight pipes and

drains that are resistant to pressure.

• Do not leave equipment unattended in

the workplace.

• Switch on the pressure washer only

when the pipe cleaning hose is at least

up to the red marking in the pipe to be

cleaned.

• During high pressure operation, do not

pull the inserted hose completely out of

the pipe to be cleaned. You might be

injured by the four pressure jets coming

out at the back.

• The maximum washing temperature

must not exceed 60°C. The hose could

be damaged.

Initial Operation

1. Connect the connecting piece

(4) to the pressure washer spray

gun Parkside (8). Turn it by 90°

until it engages (bayonet joint).

2. If necessary, connect the enc-

losed adapter (8) to the spray

gun before installing the con-

necting piece (4) from the pipe

cleaning hose.

3. Push the pipe cleaning hose (3) at

least up to the red safety marking

(7) into the pipe to be cleaned.

Caution! The red safety marking

must be in the pipe before the

pressure washer is switched on.

The high-pressure jet could cause

injury.

4. Switch on the pressure washer

and squeeze the trigger on the

spray gun ( 8).

5. Whilst the nozzle head (5) is

moving through the pipe indepen-

dently, feed in the pipe cleaning

hose (3) manually.

1 2 ... 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments