Parkside Pipe Cleaning Set User Manual download pdf (Page 14)

14

GB MT

Intended purpose

The pipe cleaning set clears blockages

from pipes, down pipes, drains and toilets.

The equipment is intended for use with

the Parkside PHD 100 A1, PHD 150

and PHD 150 A1 pressure washers. The

equipment is suitable for other pressure

washers if the adapter is used.

The equipment is suitable for the following

pipes:

- Curve C no more than 90°;

- Diameter D at least 40 mm;

- Radius R at least 70 mm.

min

D = 40mm

min

R = 70mm

K = 90°

max

The equipment is not intended for commer-

cial use.

The operator or user is responsible for ac-

cidents or damages to other people or their

property.

The manufacturer is not liable for damages

caused by use other than for the intended

purpose or improper operation.

Before initial start-up, please

read through these operating

instructions carefully prior to

using the machine. Keep the

instructions safe and pass

them on to any subsequent

user so that the information

is always available.

Safety information

Please also observe the safety

instructions for your pressure

washer.

To avoid accidents and injuries:

Pressure washers can be

dangerous if used incorrectly.

Do not direct the jet at people,

animals, live electrical equip-

ment or the equipment itself.

• The device must not be used by people

(including children) with limited physical,

sensory or mental faculties or who lack

the necessary experience and/or know-

ledge - other than they are supervised

by a person responsible for safety or

are being instructed to operate the ap-

pliance by such a person.

• Children must be supervised in order

to ensure that they do not play with the

equipment.

• Operation of the equipment is not per-

mitted for people under the age of 16.

• Do not leave equipment unattended in

the workplace.

• Switch on the pressure washer only

when the pipe cleaning hose is at least

up to the red marking in the pipe to be

cleaned.

• During high pressure operation, do not

pull the inserted hose completely out

of the pipe to be cleaned. The high-

pressure jet could cause injury.

• The maximum washing temperature

must not exceed 60°C. The hose could

be damaged.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments