Parkside PNTS 1500 B2 User Manual download pdf (Page 9)

9

IE CYGB

Assembly

Pull out the mains plug.

Danger of electric shock.

1. Attach the feet (6) to the housing:

- The feet with wheels (6a) num-

bered



+



must be tted

into the appropriate adaptors

on the rear side of the waste

collector (see

small picture).

- The feet with guide rollers

(6b) must be tted to the hold-

ers on the front side of the

container (5).

2. Secure the feet with the Philips

head screws supplied.

3. Place the motor housing (3) on

top of the collector (5) and close

it with the clip.

4. Lightly squeeze together the

ends of the retaining bracket

(25) and click it into the motor

housing (3).

5. Installing the accessories:

- Attach the vacuum hose (18).

- Install the telescopic suction

tube (16). (Press the button on

the telescopic suction pipe to-

wards

and pull out to the

desired length).

- Install the nozzle desired (

21/22/23/24).

Never vacuum without a

lter!

Operation

Switching on/off

Connect the mains plug.

To vacuum dust, plug the electrical

tool onto the mains socket on the

vacuum (

9).

Only connect electrical appliances

with a maximum power rating of

1400 W.

Switching on the vacuum cleaner

(Permanent operation):

Move the On/Off switch

( 10)

to the “I”

position.

Switch on electrical appliance +

vacuum cleaner:

1. Move the On/Off switch

(10)

to the position

2. Switch on electrical appliance.

Switching on the electrical appli-

ance automatically switches on the

vacuum cleaner. Once the electrical

appliance has been switched off,

the vacuum cleaner switches off fol-

lowing a time lapse.

Switching off the vacuum cleaner:

Move the On/Off switch

( 10)

to the

“0” position.

Work breaks

To store the assembled suction set during

a work break, the telescopic suction tube

(16) can be pushed



together and the suction tube holder

(17) plugged into the socket on the mo-

tor head (3);



Place the telescopic suction tube (16)

in the retaining bracket (25).

Dry vacuuming

1. To vacuum dry, t the uted lter (11a)

onto the lter cage on the motor hous-

ing (3). Here, the upward curved seal-

ing lip must point away from the motor

housing.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments