5
PSTD 800 A1
GB
IE
CY
■ Keep your hands away from the sawing area.
Do not reach underneath the workpiece. Contact
with the saw blade may result in injury.
■ Keep your hands away from the stroke
rod and t
he quick-release chuck. Contact
with these components may result in a crushing
injury.
■ Always switch on the electrical power tool before
applying it to the w
orkpiece. Otherwise, there is
a risk of a kickback.
■ When sawing, ensure that the baseplate
is in contact with the workpiece.
■ After completing your work, switch the electric
tool off
and do not pull the saw blade out
of the cut until the tool has come to a standstill.
This avoids kickbacks, and allows you to put
the tool down safely.
■ Only use undamaged saw blades that are in
per
fect working order. Bent and blunt saw blades
can break or cause a kickback.
■ Do not try and slow the saw blade
down
after switching off by applying lateral pressure.
The saw blade can be damaged, break or
cause a kickback.
■ Immobilise the workpiece securely. Use clamps/
vices to hold the w
orkpiece fi rmly. This is much
safer than simply holding it in your hand.
■ Always run the power cord away from the
appliance to the r
ear.
■ Never work on moistened materials or wet
sur
faces.
■ Hazards caused by dust! When w
orking for
extended periods on wood and, in particular,
materials that produce dusts that are hazardous
to health, connect the appliance to an appropri-
ate dust extraction appliance.
■ Wear a dust mask.
■ Ensure there is suffi cient
ventilation.
WARNING! Protect yourself from
laser radiation!
■ Never look directly into the laser beam or into
the opening from which it emerges.
WARNING!
► Looking at a laser beam through optical
instruments (e.g. magnifying glasses etc.)
can cause e
ye injuries.
► Caution! If operating and adjustment equip-
ment is used or pr
ocedures other than those
specifi ed here are carried out, this may result
in hazardous radiation exposure.
■ Never aim the laser beam at refl ective surfaces,
people or animals. E
ven brief visual contact
with a laser beam can result in eye injuries.
Original accessories/additional
equipment
■ Only use the accessories and additional
equipment that are specifi ed in the operat-
ing instructions and are compatible with
the appliance.
Information on saw blades
The Parkside basic equipment includes saw blades
for use with wood and metal.
▯ 3 saw blades for general wood cuts
▯ 1 saw blade for light metals up to 3 mm
NOTE
► You can also use any other saw blades pro-
vided the
y are fi tted with a suitable mounting
(single-lug shank).
IB_90967_PSTD800A1_GB_IE_CY.indb 5IB_90967_PSTD800A1_GB_IE_CY.indb 5 02.08.13 10:1302.08.13 10:13
Comments to this Manuals