Parkside PFBS 9.6 A1 User Manual download pdf (Page 42)

42 GB

Operation / Maintenance and cleaning / Service / WarrantyOperation

Inserting or replacing

a tool / collet

Press the spindle lock

and keep it pressed.

Rotate the clamping nut

until the lock

engages.

Loosen the clamping nut

with the combina-

tion key

If a tool is already inserted, remove it.

First insert the tool you wish to use through the

clamping nut

before you insert it into the

collet

suitable for the tool shaft.

Press the spindle lock

and keep it pressed.

Insert the collet

into the threaded insert and

tighten the clamping nut

on the thread using

the combination key

NOTE: Use the screwdriver end of the combi-

nation key

to release or tighten the screw of

the mandrels

Switching on and oﬀ / Setting

the speed range

Switching on / Setting the speed range:

Set the ON / OFF switch

to position “I”.

Set the rotational speed control

to a position

between „1“ and „MAX.“.

Switching oﬀ:

Set the ON / OFF switch

to position “0”.

Advice on working with

materials / Tools / Speed ranges

Use the highest speed when working on steel

or iron with the milling bits.

Use a short trial on a test piece to determine the

optimum rotational speed range for working on

zinc, zinc alloy, aluminium, copper and lead.

Use the low speed range for working on plastics

and low-melting point materials.

Use high speeds on wood.

Use the medium speed range for cleaning,

polishing and buﬃng.

The following information shall be considered as

recommendatory only. Learn by practical experience

which tools and settings are the best for the materi-

als you work with.

Setting the appropriate speed

Symbols

Rotational

speed

control

Material

1–3

Plastics and low melting

point materials

6–7

Hardwood

4–5

Stone, Ceramics

Max

Steel

Softwood, metal

Examples of appropriate tool selection Function

Function Accessory Application

Drilling

HSS drill

Drilling wood (see Fig. C)

Milling

Milling bits

Various tasks, e.g. hollowing out, gouging,

shaping, grooving or slotting

Engraving

Engraving bits

Markings (see Fig. D)

1 2 ... 37 38 39 40 41 42 43 44 45 46

Comments to this Manuals

No comments

Parkside PFBS 9.6 A1 User Manual Page 42

Comments to this Manuals

Related products and manuals for Tools Parkside PFBS 9.6 A1