Parkside PNTS 1400 B1 User Manual download pdf (Page 8)





- Paper lter bag

- Switchable household nozzle

- Crevice nozzle

- 10 cross-head screws

- 2 plastic washers

Dispose of the packaging material in a

proper manner.

Assembly

Pull out the mains plug.

Danger of electric shock.

1. Plug the front steering castor (11) into

the slot on the front of the stainless

steel container (9). Fix the steering

castor with 2 crosshead screws.

2. Plug the attachment ports (15) with

the rear steering castor (14) into the

slot on the rear of the stainless steel

container (9). Screw these in place

with 2 crosshead screws.

3. Fit both wheels (12) and plastic wash-

ers (at surface towards the equip-

ment). Fix each wheel with 1 cross-

head screw. Fit the hubcaps.

4. Fit the bow handle (1) onto the two

bow handle tie bars (2) and screw it in

place with 2 crosshead screws.

5. Fold down the bow handle (1) towards

the suction nozzle (8). Place the mo-

tor head (3) on the stainless steel

container (9). Close the stainless

steel container by folding up the bow

handle and xing it with the locking

levers

(the tension can be ad-

justed with the locking lever adjusting

screw). Several positions are possible

for the bow handle.

 

6. Fit the power cable holder (4) onto the

motor head (3) and screw it in place

with 2 crosshead screws.

7. Fit the accessories:

- Connect the suction hose (21).

- Fit the handle (22)

- Fit the telescopic suction pipe (19).

(Press the knob on the telescopic

suction pipe in the

direction and

separate to the desired length).

- Fit the desired nozzle (27/28).

To store the suction set during

breaks, push together the tel-

escopic suction hose and plug the

suction pipe holder into the socket

on the motor housing (see picture

below).

Switching on/off

Connect the mains plug.

Do not vacuum without a lter!

(How to insert the lter is described

in the chapters “dry vacuuming“

and “wet vacuuming“).



On/Off Switch (see

6) In position ““



On/Off Switch (see

6) In position “”

Dry vacuuming

1. For dry vacuuming, t the pleated lter

(25) onto the lter basket on the motor

head (3). The sealing lip that curves

upward must point away from the mo-

tor head.

2. Fit the lter cover (24) and lock it with

a light turn:

Lock the lter cover

Unlock the lter cover

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 65 66

Comments to this Manuals

No comments