Parkside PHD 150 D3 User Manual download pdf (Page 49)

49

MTGB

ow preventer in conformity with EN

12729 type BA must be used.

Water that has passed through a backow

preventer is classied as undrinkable.

A backow preventer is available in spe-

cialist shops.

• Employ an ordinary garden hose for

the water intake and ensure sufcient

length.

• Use the device on a domestic water

connection with an output of at least

450 l/h.

• Irrespective of the water pipe, you can

also use the device (for example, rain

barrel) through the integrated water

suction function. This function must only

be used with a suction hose with a l-

ter basket.

The device itself must not be immer-

sed in open water sources. There

is a risk of personal injury from an

electric shock.

Do not draw in any water from na-

tural accumulations. There is a risk

of contamination from backwashed

cleaning agent.

Setting up

1. Fold the handle after upwards until it

engages with a resistor. Fold out the

handle of the hose reel. You audibly

snaps.

2. Slide the holder for mains cable (11)

and the jet gun holder (4) onto the

guides on the device housing.

3. Connect the high-pressure tting (jet

gun) (2) to the jet gun (1). Use the fork

spanner from the package.

4. Connect the feed hose to the water

supply and allow water to escape from

the other end of the feed hose with no

bubbles, in order to expel the air from

the feed hose. Switch off the water tap.

5. Connect the feed hose with the help of

the quick connector for garden hose

adapter (15) with the water connection

coupling (9) and the water connection

(10) on the device. Always use the l-

ter insert (8) and clean this as required

(bayonet xing).

6. Plug in and turn the turbo dirt blaster

(18) or the standard Vario nozzle (19)

or the rotating wash brush (20) to con-

nect to the jet gun (1).

7. To change the jet tube (18/19) or the

rotating wash brush (20) push in the

tube or brush and turn in the opposite

direction.

Mains connection

The pressure cleaner you have acquired

is already tted with a mains plug. The

equipment is designed for connection to

an earthed wall socket with a residual

current operated device (RCD switch) at

230V~50Hz.

Only operate the pressure cleaner

after all the above points have been

observed.

1. Ensure that the pressure cleaner is

turned off by its ON / OFF switch (6).

2. Insert the mains plug into the mains

socket

Operation

Be prepared for the recoil

force of the emitted wa-

ter jet! Ensure that you are

standing rmly and that you

are holding the gun (1) se-

curely, otherwise you could

injure yourself or other peo-

ple.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 77 78

Comments to this Manuals

No comments