Parkside PHD 150 D3 User Manual download pdf (Page 15)

15

GB

Trouble shooting

Problem Possible cause Remedy

Severe pres-

sure uctua-

tions

Standard Vario nozzle (19)

is soiled

Rinse the standard Vario nozzle (19)

with water. If required, clean the nozzle

bore hole with a needle (see chapter en-

titled cleaning).

Standard Vario nozzle (19)

is blocked

Remove the Standard Vario nozzle (19)

and ensure that the water can discharge

from the jet gun (11) unimpeded. In

other words, the device is working per-

fectly. The turbo dirt blaster (18) and the

rotating wash brush (20) do not normally

get blocked.

Pressure

cleaner is not

operating

ON / OFF switch (6) is

turned off

Check ON / OFF switch (6)

Damaged power supply

cable

Switch off the equipment and disconnect

from the mains. Check power supply

cable for damage. If necessary have the

power supply cable replaced by a quali-

ed electrician.

Mains fault

Check the electrical system for conform-

ity with the data on the rating plate.

Pressure clean-

er does not

generate any

pressure

Air trapped in the pressure

cleaner

Switch on the equipment with the jet gun

and with no nozzle until bubble-free wa-

ter comes out.

Drop in the water mains

pressure

Check the water mains.

Leaks in the

water system

Connections not tted cor-

rectly

Switch off the equipment and disconnect

from the mains. Reconnect the equipment

to the water pipes (cf. “Initial Operation/

Set-Up”)

Water connection (10) leaks

Switch off the equipment and discon-

nect from the mains. Replace the water

connection (10) inc. gasket (cf. “Spare

Parts”)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 101 102

Comments to this Manuals

No comments