Parkside PSBM 500 A2 User Manual download pdf (Page 40)

40 GB

Before first use / First use

Before ﬁrst use

DANGER OF INJURY!

Switch the device oﬀ and pull the plug out of the

mains socket before carrying out any work on the

device.

Attaching the auxiliary handle

NOTE: For safety reasons this tool must always be

used with the auxiliary handle

in place.

Turn the wing screw

anti-clockwise and swivel

the additional handle

into the desired position.

Then tighten the wing screw

again.

Using the depth stop

Open the wing screw

Make sure that the toothing on the depth stop

is pointing downwards.

Pull the depth stop

out as far as necessary

so that the distance between the tip of the drill

and the tip of the depth stop corresponds to

the desired drilling depth.

Firmly tighten the wing screw

Inserting tools

Quick-action drill chuck:

Take ﬁrm hold of the back casing

of the

quick-action drill chuck

and turn the front

casing

until the tool can be inserted.

Insert the tool.

Take ﬁrm hold of the back casing

of the

quick-action drill chuck

and turn the front

casing

ﬁrmly shut.

Assembly tools for screws and nuts:

When using screwdriver bits, always use a

universal bit holder.

To screw things in, always switch the changeover

switch “drill / percussion drill”

to the right to

position

First use

Switching on and oﬀ

When operating the hammer-action drill you can

select between intermittent or continuous operation

mode. In either mode the device functions as follows:

To switch on intermittent operation mode:

Press the ON / OFF switch

To switch off intermittent operation mode:

Release the ON / OFF switch

Switching continuous operation on:

Press and hold the ON / OFF switch

down

and press the locking button

To switch off continuous operation mode:

Press and then release the ON / OFF switch

Inﬁnitely adjustable

speed setting

The ON / OFF switch

has a variable speed control.

Pressing the ON / OFF switch

increases the

speed.

Setting the direction of rotation

With the rotational direction switch

you can

change the rotational direction of the electrical

tool.

NOTE: This is, however, not possible when the

ON / OFF switch

is pressed down.

NOTE: Hold the appliance in the direction of work.

Clockwise rotation:

Push the rotational direction switch

to the

Left in order to drill and to screw in screws.

Anticlockwise rotation:

Push the direction of rotation switch

to the

right to slacken a screw or screw it out.

First use / Servicing and cleaning / Service centre / Warranty / Disposal

1 2 ... 35 36 37 38 39 40 41 42 43

Comments to this Manuals

No comments

Parkside PSBM 500 A2 User Manual Page 40

Comments to this Manuals

Related products and manuals for Power tools Parkside PSBM 500 A2