38
Operation
Switching on/off
Connect the mains plug.
Switching on the vacuum:
On/off switch (
3) in position “I”
Switching off the vacuum:
On/off switch (
3) in position “O”
Nozzle usage
Floor nozzle ( 18) with insert at-
tachment (
19):
for wet and dry vacuuming of smooth sur-
faces and tted carpets.
Floor nozzle (
18) without insert
attachment (
19):
for wet and dry vacuuming of tted carpets
and for removing persistent dirt.
• Press the clips on the right and left side
of the oor nozzle (
18) and remove
the insert attachment (
19).
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle (
20):
for vacuuming gaps, corners and radia-
tors.
Wet vacuuming
In order to wet vacuum, attach the foam
lter (15) onto the lter basket (21).
To avoid tearing the foam lter (15):
- Use only a dry lter;
- Turn over the edge of the lter a little.
If the waste tank is full, a oat
closes the suction opening, and the
vacuum operation is interrupted.
Switch off the machine and empty
the waste tank.
If foam or liquid exits, switch off the
machine immediately.
Dry vacuuming
For dry vacuuming, pull the material lter
(16) over the lter basket.
A corrugated lter, which can be
used instead of the fabric lter
included in delivery, is optionally
available (see „Replacement parts/
Accessories“).
Vacuuming with the paper lter
bag:
To avoid the uted lter becoming
clogged, we recommend the addi-
tional use of a paper lter bag.
Insert the material lter
1. Pull the material lter (16) over the l-
ter basket (21).
Insert the paper lter bag
2. Fold down the side aps (22) on the
paper lter bag (17) at the perforation.
3. Fit the paper lter bag (17) with the
short ap (22) upwards over the intake
connections (23) (see arrow
). The
sealing ring (24) at the lter bag open-
ing must completely surround the lip on
the suction pipe.
A ne dirt lter bag made of micro
lter eece is also optionally avail-
able, which can be used in place
Comments to this Manuals