Parkside PSTD 800 A1 User Manual download pdf (Page 9)

5

PSTD 800 A1

GB

■ After completing your work, switch the electric

tool oﬀ and do not pull the saw blade out

of the cut until the tool has come to a standstill.

This avoids kickbacks, and allows you to put

the tool down safely.

■ Only use undamaged saw blades that are in

perfect working order. Bent and blunt saw blades

can break or cause a kickback.

■ Do not try and slow the saw blade down

after switching oﬀ by applying lateral pressure.

The saw blade can be damaged, break or

cause a kickback.

■ Immobilise the workpiece securely. Use clamps/

vices to hold the workpiece ﬁ rmly. This is much

safer than simply holding it in your hand.

■ Always run the power cord away from the

appliance to the rear.

■ Never work on moistened materials or wet

surfaces.

■ Hazards caused by dust! When working for

extended periods on wood and, in particular,

materials that produce dusts that are hazardous

to health, connect the appliance to an appropri-

ate dust extraction appliance.

■ Wear a dust mask.

■ Ensure there is suﬃ cient ventilation.

WARNING! Protect yourself from

laser radiation!

■ Never look directly into the laser beam or into

the opening from which it emerges.

WARNING!

► Looking at a laser beam through optical

instruments (e.g. magnifying glasses etc.)

can cause eye injuries.

► Caution! If operating and adjustment equip-

ment is used or procedures other than those

speciﬁ ed here are carried out, this may result

in hazardous radiation exposure.

■ Never aim the laser beam at reﬂ ective surfaces,

people or animals. Even brief visual contact

with a laser beam can result in eye injuries.

Original accessories/additional

equipment

■ Only use the accessories and additional

equipment that are speciﬁ ed in the operat-

ing instructions and are compatible with

the appliance.

Information on saw blades

The Parkside basic equipment includes saw blades

for use with wood and metal.

▯ 3 saw blades for general wood cuts

▯ 1 saw blade for light metals up to 3 mm

NOTE

►

You can also use any other saw blades pro-

vided they are ﬁ tted with a suitable mounting

(single-lug shank).

Saw blade type

suitable unsuitable

IB_100054_PSTD800A1_LB4.indb 5 22.05.14 16:07

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Comments to this Manuals

No comments