Parkside PBH 1050 A1 User Manual download pdf (Page 38)

38 GB

for outdoor use. Using an extension cable

suitable for outdoor use reduces the risk of

electric shock.

f) Use an earth leakage circuit breaker

if operating the power tool in a moist

environment cannot be avoided. Using

an earth leakage circuit breaker reduces the

risk of electric shock.

3. Personal safety

a) Remain alert at all times, watch what

you are doing and always proceed

with caution when using power tools.

Do not use power tools when tired or

under the inﬂuence of drugs, alcohol

or medication. One moment of carelessness

whilst using the power tool can result in serious

injury.

b) Always wear protective equipment

and safety glasses. Wearing personal

protective equipment such as a dust mask, non-

slip safety shoes, safety helmet or ear protec-

tors, depending on the type and application

of the power tool, reduces the risk of injuries.

c) Avoid accidental starting. Verify the

power tool is switched oﬀ before con-

necting it to the mains, picking it up or

carrying it. Carrying the power tool with

your ﬁnger on the ON / OFF switch or with the

device switched on can result in accidents.

d) Remove any adjusting tools or span-

ners before switching on the power

tool. Leaving a tool or spanner attached to a

rotating part of a device can lead to injury.

e) Avoid unnatural postures. Always

maintain proper footing and balance.

This will ensure having better control over the

power tool in unforeseen circumstances.

f) Wear suitable clothing. Do not wear

loose clothing or jewellery. Keep your

hair, clothing and gloves clear of mov-

ing parts. Loose clothing, jewellery or long

hair can become trapped in moving parts.

g) When using vacuum dust extraction

and collection devices remember to

verify these are properly connected

and used. Using of such devices reduces the

hazard presented by dust.

4. Handling and using

the power tool

a) Do not overload the device. Always

use a power tool intended for the task.

By using the right power tool for the job you will

work more safely and achieve a better result.

b) Do not use a power tool with a defec-

tive switch. Power tools that can no longer

be switched on and oﬀ are dangerous and must

be repaired.

c) Unplug from the mains before chang-

ing device settings or accessories, or

setting the device down. This precaution

will prevent the power tool from starting acci-

dentally.

d) Always be sure to keep power tools

out of reach of children when not in

use. Do not let anyone use the device

if he or she is not familiar with it or

has not read the instructions and ad-

vice. Power tools are dangerous when used

by inexperienced individuals.

e) Maintain the power tool with care.

Check that moving parts are working

properly and move freely. Check for

any parts that are broken or damaged

enough to detrimentally aﬀect the

function of the power tool. Have dam-

aged parts repaired before using the

unit. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and easier

to control.

g) Use the power tool, accessories, insert-

ed tools etc. according to these instruc-

tions. When doing so consider the

working conditions and the applica

tion.

Using power tools for purposes other than those

intended can lead to dangerous situations.

General safety advice on power tools General safety advice on power tools / Start-up

1 2 ... 33 34 35 36 37 38 39 40 41 42 43

Comments to this Manuals

No comments