Parkside PLS 48 A1 User Manual download pdf (Page 16)

16 GB/IE

Using the product / Maintenance and cleaning

j Clean the soldering tip

on the moist solder sponge

j After cleaning the tip

it must be “tinned” (coated with solder).

This is done by melting solder on to the hot soldering tip

j Guide the soldering tip

to the intended joint site and heat the joint.

j Place the solder (with ﬂux) between the joint site and the tip

to melt it.

j Continue to feed further solder until the whole joint has a covering

of solder.

j Then quickly remove the soldering tip in order to avoid overheating

the molten solder.

j Allow the solder to harden while not subjecting it to vibration or

movement.

j Note: The ﬂux is either already contained in the solder or applied

separately. Ask the advice of the retailer when buying solder in or-

der to choose the most suitable solder for your intended purpose.

Attachments and applications:

ATTENTION! Do not carry out any special changes or repairs to the

electrics or other parts. Exceptions are permitted if the person carrying

out such changes or repairs is qualiﬁed or trained to do so.

Try every application out on surplus material and see if you get the eﬀect

you wish to have. This means you will avoid damaging the item you

wish to work on.

Maintenance and cleaning

WARNING!

RISK OF INJURY! Before you carry out any work

on the device always pull the mains plug out of the mains socket and

allow the device to cool.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 84 85

No comments

Parkside PLS 48 A1 User Manual Page 16