Parkside PNTS 1300 B2 User Manual download pdf (Page 8)





- Material lter ( 16) for dry

vacuuming

- Paper lter bag for ne dust

(

17)



4. Place the motor housing (1) on

top of the dirt collector (6) and

close it with the clip (9).







5. Connect the vacuum hose (13)

and the accessories.

Switching on/off

Connect the mains plug.



On / off switch (

3) in position “”



On / off switch (

3) in position “”

Wet vacuuming

In order to wet vacuum, attach the foam

lter (15) onto the lter tray. Only use a

dry lter.

If the waste tank is full, a oat clos-

es the suction opening, and the

vacuum operation is interrupted.

Switch off the machine and empty

the waste tank.

If foam or liquid exits, switch off the

machine immediately.

Dry vacuuming

For dry vacuuming, pull the material lter

(16) over the lter basket.



When vacuuming very ne dust,

you may nd dirt accumulating

more quickly than usual. We there-

fore recommend additional use of

the paper lter bag.



1. Pull the material lter (16) over the

lter basket.



2. Fold down the side aps (21) on the

paper lter bag (17) at the perforation.

3. Fit the paper lter bag (17) with the

short ap upwards over the internal

suction pipe (22) (see arrow

).

The sealing ring (23) at the lter bag

opening must completely surround the

lip on the suction pipe.

Blowing

To blow, plug the suction hose (13) onto

the connection (10) on the motor head.

Cleaning/Maintenance/

Storage

Pull out the mains plug.

This will prevent danger of injury

from electric shock.

Always check the appliance before

use for any obvious faults such as

a defective mains cable, and have

these repaired or replaced.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 61 62

Comments to this Manuals

No comments