Parkside PNTS 1400 A1 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
 
Assembly
Pull out the mains plug.
Danger of electric shock.
The package contains an antistatic
chain which you may wish to install
at the bottom of the appliance to
avoid electrostatic charge during
operation.
1. Attach the antistatic chain (24)
to the metal hook at the bottom
of the stainless steel container
(6) (see small picture in the
middle).
2. Screw on the carrying handle
(2) with the enclosed cross-
head screws.
3. Place the feet (8a+b) on the
casing:
-
The feet with the swivel cas-
tors (8a) in the sockets on the
front of the container (6)
- The feet with the wheels (8b)
with the imprinted numbers
+
into the corresponding
holes on the back of the con-
tainer (see small picture above).
4. Attach the feet using the en-
closed cross-head screws.
5. Fit the motor head (1) onto the
stainless steel container (6)
(see picture
) and x it with
the xing clips (10).
6. Plug the air diffuser (17) into the
blow connection (11) (bayonet
xing).
7. Fit the accessories:
- Connect the suction hose (15)
(bayonet xing).
- Fit the handle (16)
- Fit the telescopic suction pipe
(13).
(Press the knob on the tel-
escopic suction pipe in the
direction and separate to the
desired length).
- Fit the desired nozzle.
To store the suction set during
breaks, push together the tel-
escopic suction hose and plug the
suction pipe holder into the socket
on the motor housing (see small
picture below).
Switching on/off
Connect the mains plug.
Do not vacuum without a lter!
(How to insert the lter is described
in the chapters “dry vacuuming“
and “wet vacuuming“).

On/Off Switch (see
no. 3)
In position “

On/Off Switch (see
no. 3)
In position “
Dry vacuuming
1. For dry vacuuming, t the pleated lter
(20) onto the lter basket on the motor
head (1). The sealing lip that curves
upward must point away from the mo-
tor head.
2. Fit the lter cover (19) and lock it with
a light turn:
Lock the lter cover
Unlock the lter cover
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments