Parkside PNTS 1400 A1 User Manual download pdf (Page 9)







While vacuuming ne dust, you

may nd dirt accumulating faster

than usual. For this reason, we

recommend the use of a paper l-

ter bag for ne dust.

1. Fit the pleated lter (20).

2. Completely unfold the paper lter bag

(21) and pull it over the internal suction

nozzle (5) in the stainless steel con-

tainer (6) (see

). The connector on

the suction nozzle must be completely

enclosed by the sealing ring on the l-

ter bag opening.

Wet vacuuming

For wet vacuuming or to vacuum water, t

the foam lter (18) to the lter basket on

the motor head (1).

When the container is full, the suc-

tion opening is shut off by a oat,

and suction is then cut off.

Switch the appliance off, remove

the plug from the socket and

empty the container (see Cleaning/

Maintenance/Storage).

If foam or liquid exits, switch off the

machine immediately.

Blow Function

• To blow, take off the air diffuser (17)

(bayonet xing).

• Screw the suction hose (15) (bayonet

xing) onto the blow connection (11)

on the motor head (1).

Cleaning/Maintenance/

Storage

Pull out the mains plug.

Danger of electric shock.

Always check the appliance before

use for any obvious faults such as

a defective mains cable, and have

these repaired or replaced.













• After use, empty the

stainless steel

container

( No. 6). Opening the

drain plug to allow the vacuumed liquid

to drain out (

No. 7).

A liquid residue remains in the con-

tainer.

• Clean the waste tank with a damp cloth.

• Wash the foam lter (

No. 18) with

lukewarm water and soap, and allow

to dry.

• Beat the dust out of the uted lter

(

No. 20) and clean it with a paint

brush or hand brush.

• Replace the paper lter bag (

No. 21) when full (see “replacement

parts” for reordering)

• Wash out the air diffuser lter (see

no. 17) with lukewarm water and soap

a leave it to dry.



- To store, wind the mains power

cable (12) around the cable

holder (9) on the back of the

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 65 66

Comments to this Manuals

No comments