Parkside PHKS 1350 A1 User Manual download pdf (Page 33)

PHKS 1350 A1

d) Support large panels to minimise the risk of

blade pinching and kickback. Large panels

tend to sag under their own weight. Supports

must be placed under the panel on both sides,

near the line of cut and near the edge of the

panel.

e) Do not use dull or damaged blades.

Unsharpened or improperly set blades produce

narrow kerf causing excessive friction, blade

binding and kickback.

f) Blade depth and bevel adjusting locking

levers must be tight and secure before making

cut. If blade adjustment shifts while cutting, it

may cause binding and kickback.

g) Use extra caution when sawing into existing

walls or other blind areas. The protruding blade

may cut objects that can cause kickback.

Lower guard function

a) Check lower guard for proper closing

before each use. Do not operate the saw if

lower guard does not move freely and close

instantly. Never clamp or tie the lower guard

into the open position. If saw is accidentally

dropped, lower guard may be bent. Raise the

lower guard with the retracting handle and

make sure it moves freely and does not touch

the blade or any other part, in all angles and

depths of cut.

b) Check the operation of the lower guard

spring. If the guard and the spring are not

operating properly, they must be serviced be-

fore use. Lower guard may operate sluggishly

due to damaged parts, gummy deposits, or a

build-up of debris.

c) Lower guard may be retracted manually

only for special cuts such as “plunge cuts”

and “compound cuts”. Raise lower guard by

retracting handle and as soon as blade enters

the material, the lower guard must be released.

For all other sawing, the lower guard should

operate automatically.

d) Always observe that the lower guard is

covering the blade before placing saw down

on bench or ﬂ oor. An unprotected, coasting

blade will cause the saw to walk backwards,

cutting whatever is in its path. Be aware of the

time it takes for the blade to stop after switch is

released.

Supplementary notes

■ Do not use any grinding discs.

■ Use only saw blade with diameters correspond-

ing to the label on the saw.

■ When sawing wood or other materials which

may create dusts that are hazardous to health,

always connect a suitable, certiﬁ ed vacuum

extractor device.

■ Wear a dust mask when sawing wood.

■ Use only the recommended saw blades.

■ Always wear ear protectors.

■ Do not allow the teeth of the saw blade to overheat.

■ When sawing plastic, avoid melting the plastic.

IB_36453_PHKS1350A1_LB_DE_AT_NL.indb 30IB_36453_PHKS1350A1_LB_DE_AT_NL.indb 30 28.04.14 08:3428.04.14 08:34

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Parkside PHKS 1350 A1 User Manual Page 33

Comments to this Manuals

Related products and manuals for Power saws Parkside PHKS 1350 A1