Parkside PHKS 1350 A1 User Manual download pdf (Page 34)

PHKS 1350 A1

WARNING! Protect yourself from laser

radiation!

LASER RADIATION

DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

P max.: < 1 mW

λ: 650 nm

EN 60825-1: 2007

This appliance contains a Class 2 laser.

► NEVER direct the laser beam at people or

animals.

► NEVER look directly into the laser beam.

The laser beam can cause serious eye damage.

► Do NOT direct the laser beam at strongly

reﬂ ective material. Reﬂ ected laser beams are

also dangerous.

► Any adjustment intended to increase the

intensity of the laser beam is forbidden.

There is a risk of personal injury!

► No liability will be accepted for damage

resulting from manipulation of the laser

equipment or from disregarding these safety

instructions.

Changing the batteries:

■ Open the cover of the battery compartment

with a suitable Philips screwdriver.

■ Remove the spent batteries.

■ Insert two new 1.5 V alkaline button cells (type

AG 13/LR 44, e.g. GPA 76) observing the

correct polarity and screw the battery compart-

ment cover ﬁ rmly closed.

CAUTION!

If operating and adjustment equipment is used or

procedures other than those speciﬁ ed here are

carried out, this may result in hazardous radiation

exposure.

Original accessories/additional

equipment

■ Only use the accessories and additional equip-

ment that are speciﬁ ed in the operating instruc-

tions and are compatible with the appliance.

Initial operation

Fitting/changing the saw blade

Always pull out the plug from the mains before

changing the saw blade !

1. Set the cutting depth (using the locking screw

)

to the minimum position, 0 mm.

2. Swing the blade guard

back using the release

lever and put the device down.

3. Press the spindle lock button

(until it engages)

and use the Allen key

to release the clamping

screw/washer . Now remover the clamping

screw/washer and the clamping ﬂ ange

(see also Fig. A).

Fig. A: Changing the saw blade

4. Remove

saw blade.

5. Fitting a saw blade

is carried out in the

reverse order.

6. Press the spindle lock button

(until it engages)

and use the Allen key

to tighten the clamping

screw/washer .

IB_36453_PHKS1350A1_LB_DE_AT_NL.indb 31IB_36453_PHKS1350A1_LB_DE_AT_NL.indb 31 28.04.14 08:3428.04.14 08:34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Parkside PHKS 1350 A1 User Manual Page 34

Comments to this Manuals

Related products and manuals for Power saws Parkside PHKS 1350 A1