Parkside PWS 125 A1 User Manual download pdf (Page 48)

48 GB

Use of accessories / Maintenance and cleaning / Service / Warranty Use of accessories

ø 125 x 22.2 mm

to max. 6 mm thick

(depressed centre)

12000 rpm

80 m / sec

Flap discs for metal

Dimensions: ø 125 mm

Speed: min. 12000 rpm

Other accessories

You can also use abrasive consumables and tools

complying with the following technical speciﬁcation:

Spindle thread: M14

Speed: min. 12000 rpm

Backing plate for grinding discs

Dimensions: ø 115 mm / 125 mm

Grinding discs for wood / masonry attached

with hook and eye ﬁxings

Dimensions: ø 115 mm / 125 mm

Note! These may only be used in combination

with a backing plate!

Cup brush, crimped wire

Dimensions: ø 75–100 mm

Speed: min. 12000 rpm

Cup brush, twisted wire

Dimensions: ø 75 mm

Speed: min. 12000 rpm

Cup brush, knotted wire

Dimensions: ø 115 mm

Speed: min. 12000 rpm

Adjusting the disc guard cover

DANGER OF INJURY!

Pull the mains plug out of the mains socket

before you carry out any task on the device.

In order to adjust the safety cover

, one does

not need to remove the screws

but just loo-

sen them.

1 2 ... 43 44 45 46 47 48 49 50 51

No comments

Parkside PWS 125 A1 User Manual Page 48