Parkside PWS 230 A1 User Manual download pdf (Page 14)

14 GB

If a dangerous situation arises, pull

the mains plug immediately out of the

mains socket. Ensure that the device and

the mains plug are easily accessible and can

be reached quickly in an emergency.

When taking a break from your

work, before carrying out any tasks

on the device itself and when you are

not using the device, always pull the

mains plug out of the mains socket.

Always keep the device clean, dry and free of

oil or grease.

Remain alert at all times! Always watch

what you are doing and proceed with

caution. Do not use the device if you cannot

concentrate or you are feeling unwell.

Q

Preparing for use

Q

Attaching the disc guard cover

using the quick-release fastener

DANGER OF INJURY!

Pull the mains plug out of the mains

socket before you carry out any task

on the device.

DANGER OF INJURY! Always use the

angle grinder with the disc guard

cover in place. The disc guard cover must

be securely attached to the angle grinder. To

ensure the highest level of safety while using

the device, ensure that the smallest possible

area of the grinding or cutting tool is exposed

to the operator at all times. The disc guard cov-

er is there to protect the operator from pieces

breaking oﬀ and accidental contact with the

grinding or cutting tool.

DANGER OF INJURY! Ensure that the

guard

7

is attached so that its edge

is beyond the angle of the auxiliary

handle

6

(see Fig. B). Otherwise you

could injure yourself against the grinding or

cutting disc.

Open the clamping lever

8

.

Insert the disc cover guide

7

with the coded

projection

9

in the coded groove

16

.

Turn the disc guard cover

7

into the desired

position (working position). The closed side of

the disc guard cover

7

must always be facing

the operator.

Close the clamping lever

8

to ﬁrmly clamp

the disc guard cover

7

in place.

If necessary the clamping force of the connection

can be adjusted by tightening or loosening the

adjuster screw

10

.

Ensure that the disc guard cover

7

sits ﬁrmly

on the spindle collar.

Q

Attaching the auxiliary handle

CAUTION! For safety reasons this

device must always be used with the

auxiliary handle

6

in place. Otherwise

you could become injured.

DANGER OF INJURY!

Pull the mains plug out of the mains

socket before you carry out any task

on the device.

Screw the auxiliary handle

6

on the left, right

or on the top of the head of the device.

Q

Attaching and replacing

roughing / grinding / cutting discs

Take note of the dimensions of the roughing /

grinding or cutting discs. The circular hole must ﬁt

on to the mounting ﬂange without play. Do not use

a reducer piece or adapter.

DANGER OF INJURY!

Pull the mains plug out of the mains

socket before you carry out any task

on the device.

Check the condition of the roughing /

grinding or cutting discs. They must be

free of damage, moisture or cracks.

Otherwise they could break up during use and

cause injury.

DANGER OF BURNS! Always wear

protective gloves when changing a

roughing / grinding or cutting disc.

Roughing / grinding and cutting discs become

Preparing for use / Operation / Maintenance and cleaningGeneral power tool safety warnings / Preparing for use

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 90 91

Comments to this Manuals

No comments