Parkside PWS 125 B2 User Manual download pdf (Page 14)

14

GB IE CY

Practical tips

Scrubbing wheels:

Never use a cutting wheel for

scrubbing !

Exert only moderate pressure on the work-

piece. Move the device evenly back and

forth.

A working angle of 30° to 40° achieves

the best results for scrub grinding.

Cutting disc:

Never use a scrubbing wheel

for cutting !

Only certied, bre-reinforced cutting or

grinding discs may be used.

In general, work with small scrubs. Exert

only moderate pressure on the workpiece.

Always work in the counter-direction. This

ensures that the device is not pushed out of

the cut through lack of control.

Assembly

Caution! Risk of injury!

- Ensure that you have sufcient

space in which to work, and that

you do not endanger other peo-

ple.

- All hoods and protective devices

must be assembled properly be-

fore commissioning.

- Disconnect the mains plug be-

fore changing the setting on the

device

Mount handgrip

The device must only be

operated with the handgrip

mounted.

Screw the handgrip (1), depending on the

type of work, to the left, right or above the

device using the threading for the hand-

grip (2/6)..

Assemble/set protective

hood

The device must only be

operated with the protective

hood mounted.

1. Open the tightening lever

(

C

16)

2. Place the protective hood (

11) on the positioning holes.

3. Turn the protective hood (

11) into the working position.

The closed side of the protective

hood must always face the ope-

rator.

4. Close the tightening lever

(

C

16) again. The protective

hood should not be able to be

turned any more.

If needed, the tension on the adjustment

nut (

C

15) can be set. Use the chuck key

(

9) for this.

Installing/changing disc

1. Press the spindle stop button

(

7).

2. Release the clamping nut

(

B

13) with the chuck key

(

9).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 63 64

Comments to this Manuals

No comments