Parkside PHKS 1350 A1 User Manual download pdf (Page 36)

PHKS 1350 A1

Set rotational speed

■ Turn the adjusting wheel to the desired

rotational speed (arrow marking ▲)

(1 = lowest rotational speed/6 = highest rota-

tional speed):

Use the following suggested settings or set the rota-

tional speed on the adjusting wheel

as required.

Material Rotational

speed

setting

Cross cuts & longitudinal cuts in

hard and soft wood (solid wood)

Chipboard, ﬁ bre board 6

Core board, plywood 6

Coated and veneered boards 6

PVC sheets 3–5

Acrylic glass sheets, perspex 2-4

Aluminium plate 4-6

Aluminium proﬁ le 4-6

Plaster board 1-2

Stone wool board 1-2

Cement-bonded particle board 1-2

Tips and tricks

■ Avoid damaging the cutting edge of sensitive

materials, e.g. coated chip boards or doors,

by sticking masking tape along the cutting line.

Another beneﬁ t of this is that it is easier to mark

a line on the tape than on a shiny surface. An

even more eﬀ ective method of protecting the

cutting edges is to clamp a thin piece of wood

along the cutting line (this wood is also sawn).

Maintenance and Cleaning

WARNING! RISK OF INJURY!

Switch the appliance oﬀ and remove

the power plug before starting any

work.

■ The appliance must always be kept clean, dry

and free from oil or grease.

■ To clean the casing, use a soft dry cloth.

WARNING!

■ If the connecting cable needs to be replaced,

this must be carried out by the manufacturer

or his representative in order to avoid safety

hazards.

Disposal

The packaging consists of environmentally

friendly material. It can be disposed of in

the local recycling containers.

Do not dispose of power tools in

your normal domestic waste!

European Directive 2012/19/EU requires that worn-

out power tools are collected separately and fed

into an environmentally compatible recycling

process.

Your local community or municipal authorities can

provide information on how to dispose of the worn-

out appliance.

IB_36453_PHKS1350A1_LB_DE_AT_NL.indb 33IB_36453_PHKS1350A1_LB_DE_AT_NL.indb 33 28.04.14 08:3428.04.14 08:34

1 2 ... 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Parkside PHKS 1350 A1 User Manual Page 36

Comments to this Manuals

Related products and manuals for Power saws Parkside PHKS 1350 A1