Parkside PSFS 250 A1 User Manual download pdf (Page 31)

31 GB

Operation

Make a circle on the work piece.

Mark the centre and drill a hole into the hole

(plunge cut).

Drill a guide hole on the edge of the circle

(plunge cut) (guide hole diameter 3 mm).

Loosen the wing bolts

in the foot plate

and slide the guide rod for the circle- / rip

fence set

through the two holes in the bot-

tom of the base plate

, with the centring tip

facing down.

Insert the centring tip in the middle of the circle.

Adjust the distance of the circle- / rip fence set

so as to plunge the bit into the guide hole at

the edge of the circle.

Lock the base plate

by tightening the wing

bolts

Press and hold the ON / OFF switch

power on the unit.

Slowly push the unit forward.

Dust extraction (see Fig. I)

The tool features a dust extraction nozzle

to vacuum oﬀ dust.

Insert the adapter

in the extraction nozzle

Connect a vacuum cleaner to the adapter

Continuous tool operation

Locking the ON / OFF switch

Activate the ON / OFF switch

Press the locking switch

and release the

ON / OFF switch

Unlocking the ON / OFF switch

Activate the ON / OFF switch

and release.

Maintenance and Cleaning

The device requires no maintenance.

Clean the unit promptly after use.

Clean the device with a dry cloth, never use

petrol, solvents or cleaning agents harmful to

plastic.

Always keep the vents clear.

Remove dust clinging to the sander with a brush.

Service

Always have your

device repaired by qualified specialist

personnel using only original manu-

facturer parts. This will maintain the safety

of the device.

If the plug or mains

lead needs to be replaced, always

have

the work performed by the manufac-

turer or its service centre. This will maintain

the safety of the device.

Warranty

The warranty for this appliance is for 3

years from the date of purchase. The ap-

pliance has been manufactured with care

and meticulously examined before deliv-

ery. Please retain your receipt as proof

of purchase. In the event of a warranty

claim, please make contact by telephone

with our Service Department. Only in this

way can a post-free despatch for your

goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile compo-

nents, e.g. buttons or batteries. This product is for pri-

vate use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-

proper handling, use of force and internal tampering

not carried out by our authorized service branch. Your

statutory rights are not restricted in any way by this

warranty.

The warranty period will not be extended by repairs

made unter warranty. This applies also to replaced

Operation / Maintenance and Cleaning / Service / Warranty

1 2 ... 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments

Parkside PSFS 250 A1 User Manual Page 31

Comments to this Manuals

Related products and manuals for Power saws Parkside PSFS 250 A1