Parkside PMGS 12 B2 User Manual download pdf (Page 7)

7 GB/IE

Introduction / General safety advice for electrical power tools

Spigot nut

Spindle lock

Mains adapter (see Fig. A):

Plug-in device for plug

Tray

Mains adapter

Power cable (with mains plug)

Accessories (see Fig. B):

6 HSS drills

2 Mandrels for mounting tools

3 Polishing wheels

4 Grinding wheels

1 Metal brush

16 Cutting wheels

5 Collets

2 Plastic brushes

3 Milling bits

2 Engraving bits

5 Grinding bits

1 Combination tool

Included items

1 Small drill

1 Mains adapter

1 Plastic case

1 Accessory kit (50-piece)

1 Operating instructions

Technical information

Small drill PMGS 12 B2:

Nominal voltage: 12 V

Nominal input: 22 W

Idle-running speed: n

5000–20000 min

-1

Max. drill bit diameter: ø 3.2 mm

Certiﬁed acc. to:

EN60745-1; EN60745-2-1

EN60745-2-3

Noise and vibration data:

Measured values for noise are determined in accor-

dance with EN 60745. The A-weighted noise level

of the electrical power tool are typically:

Sound pressure level: 54.70 dB(A)

Sound power level: 65.70 dB(A)

Uncertainty K: 3 dB

Evaluated acceleration, typical:

Hand / arm vibration: 1.868 m / s

Uncertainty K = 1.5 m / s

The vibration level given in these

instructions has been measured in accordance with

a standardised measurement procedure speciﬁed

in EN 60745 and can be used to compare devices.

Diﬀerent uses of the device give rise to diﬀerent

vibration levels and in many cases they may exceed

the values given in these instructions. It is easy to

underestimate the vibration load if the electrical pow-

er tool is used regularly in particular circumstances.

Note: If you wish to make an accurate assessment

of the vibration loads experienced during a particular

period of working, you should also take into account

the intervening periods of time when the device is

switched oﬀ or is running but is not actually in use.

This can result in a much lower vibration load over

the whole of the period of working.

Mains adapter PMGS 12 B2-1:

INPUT:

Rated voltage: 230 V∼ 50 Hz

OUTPUT:

Nominal voltage: 12 V

Nominal current: 1 A

Protection class: II /

Certiﬁed acc. to: EN61558

General safety advice for

electrical power tools

Read all the safety advice

and instructions! Failure to observe the safety

advice and instructions may result in electric shock,

ﬁre and / or serious injury.

Keep all the safety advice and instructions

in a safe place for future reference!

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Comments to this Manuals

No comments

Parkside PMGS 12 B2 User Manual Page 7

Comments to this Manuals

Related products and manuals for Power tools Parkside PMGS 12 B2