Parkside PNTS 1300 B2 User Manual download pdf (Page 34)

34

GB

• Beforeeachuse,checkthepowersup-

ply lead and the extension cable for

damage and ageing. Do not use the

equipment if the cable is damaged or

worn.Danger of electric shock hazard.

• Ifthepowercableforthisequipmentis

damaged, it must be replaced by the

manufacturer, a customer service agent

ofthesameorasimilarlyqualiedper-

son in order to prevent hazards.

• Switchthemachineoffanddisconnect

the mains plug:

- when the machine is not in use,

- before the machine is opened up,

- for all maintenance and cleaning

work,

- if the connecting cable is damaged

or tangled up.

• Onlyusereplacementpartsandac-

cessories delivered and recommended

by our Service Centre (see addresses

page 30). The use of parts by other

manufacturers immediately renders the

guarantee void.

• Donotusethecabletopulltheplug

out of the socket. Protect the cable from

heat, oil, and sharp edges.

• Makesurethatthemainsvoltagecor-

responds with the information on the

rating plate.

• Onlyplugtheapplianceintoasocket

which is safeguarded by at least 13A.

• Thedevicemustonlybeconnectedto

a mains socket via a residual-current

circuit breaker (RCD) with a rated leak-

agecurrentofnotmorethan30mA.

CAUTION! The following states

how damage to the appliance and

possible injury to people can be

avoided:

• Ensurethatthemachineiscorrectly

assembledandtheltersareinthecor-

rect position.

• Donotusewithoutthelter.Thiscould

damage the machine.

• Onlyhaverepairscarriedoutatour

authorised customer service points.

• Observetheinstructionsforcleaning

and maintenance of the machine.

• Storetheapplianceinadryplaceand

out of reach of children.

Assembly

Pull out the mains plug.

 Thiswillpreventdangerofinjury

from electric shock.

1. Attach the carrying handle

(2)rmlyusingthecross-head

screws supplied.

Ensure that the notches on the

carrying handle go onto the lugs

on the motor head (1) (see small

picture).

2. Attach the feet (7) and secure the

feet with the Philips head screws

supplied.

 3. Insertthelter:

 - Foamlterforwetvacuuming

(

15).

 - Materiallter(

16) for dry

vacuuming

 - Paperlterbagfornedust

(

17)

Never vacuum without a lter!

4. Place the motor housing (1) on

top of the dirt collector (6) and

close it with the clip (9).

The fastening clips must be

hooked into the snap-in points

provided.

5. Connect the vacuum hose (13)

and the accessories.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments