8
Operation
Switching on/off
Connect the mains plug.
Switching on the vacuum:
On / off switch (
3) in position “I”
Switching off the vacuum:
On / off switch (
3) in position “O”
Nozzle usage
Floor nozzle ( 18) with insert at-
tachment (
19):
for wet and dry vacuuming of smooth sur-
faces and tted carpets.
Floor nozzle (
18) without insert
attachment (
19):
for wet and dry vacuuming of tted carpets
and for removing persistent dirt.
• Press the clips on the right and left side
of the oor nozzle (
18) and remove
the insert attachment (
19).
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle (
20):
for vacuuming gaps, corners and radia-
tors.
Wet vacuuming
In order to wet vacuum, attach the foam
lter (15) onto the lter tray. Only use a
dry lter.
If the waste tank is full, a oat
closes the suction opening, and the
vacuum operation is interrupted.
Switch off the machine and empty
the waste tank.
If foam or liquid exits, switch off the
machine immediately.
Dry vacuuming
For dry vacuuming, pull the material lter
(16) over the lter basket.
Fine dust vacuuming:
When vacuuming very ne dust,
you may nd dirt accumulating
more quickly than usual. We there-
fore recommend additional use of
the paper lter bag.
Insert the fabric lter
1. Pull the material lter (16) over the l-
ter basket.
Insert the paper lter bag
2. Fold down the side aps (21) on the
paper lter bag (17) at the perforation.
3. Fit the paper lter bag (17) with the
short ap upwards over the internal
suction pipe (22) (see arrow
).
The sealing ring (23) at the lter bag
opening must completely surround the
lip on the suction pipe.
Blowing
To blow, plug the suction hose (13) onto
the connection (10) on the motor head.
Comments to this Manuals