Parkside PDKS 120 B3 User Manual download pdf (Page 33)

33 GB

Introduction Introduction / General safety advice

2 x Guide plates

2 x Screws

10 x Saw blades

1 x Dust blow tube

3 x Feet

1 x Allen key

1 x Operating instructions

Q

Technical data

Nominal voltage: 230 V

~

50 Hz

Rated power: 120 W

Short-term operation time: 20 min (S2)

Stroke rate (no load): n

0

400–1600 min

-1

Max. cut depth 90°: 50 mm

Max. cut depth 45°: 22 mm

Dimensions: 30 x 60,4 x 29,8 cm

(H x L x W)

Weight: 11,25 kg

Noise data:

A-weighted sound levels.

Sound pressure level: 67.2 dB (A)

Sound level: 80.2 dB (A)

Uncertainty K: 3 dB

Values determined in accordance with EN 61029.

General safety advice

CAUTION! In order to protect yourself from

the danger of electric shock, injury or ﬁre when

using electrical power tools, please observe

the following basic safety precautions. Read all

these requirements before you use the electrical

power tool, and keep the safety advice in a

safe place.

Q

Working safely

1. K

eep your working area clean and tid

y.

A disorderly working area can lead to accidents.

2. Be aware of the effects of the environ-

ment.

Do not leave electrical power tools out in the rain.

Do not use electrical power tools in moist or

wet surroundings.

Ensure that your working area is well lit.

Do not use electrical power tools in

areas where there is risk of ﬁre or

explosion.

3.

Protect yourself from electric

shock.

Avoid touching earthed objects such as pipes,

heating radiators, ovens or refrigerators with

parts of your body.

4. Keep other people at a safe distance.

Do not allow other people, in partic-

ular children, to touch the electrical

power tool or the mains lead.

Keep them away from your working area.

5. Store currently unused electrical

power tools in a safe place.

When not being used electrical power tools

should be stored in dry conditions in a high or

enclosed place, out of reach of children.

6. Do not overload your electrical power

tool.

By keeping within the speciﬁed working range

of the tool you will work more safely and

achieve a better result.

7. Use the right electrical power tool for

the task.

Do not use low-output devices for heavy tasks.

Do not use an electrical power tool for purposes

for which it was not intended. For example, do

not use a hand operated circular saw for trim-

ming tree branches or cutting logs.

8. Wear suitable clothing.

Do not wear loose-ﬁtting clothing or jewellery.

They could become caught on moving parts.

We recommend that you wear anti-slip footwear

when working outdoors.

If you have long hair, wear a hair net.

9.

Use personal protective

equipment.

Wear protective glasses.

Wear a dust mask if your work generates dust.

10. Attaching the vacuum dust extraction

device.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39

Comments to this Manuals

No comments