Parkside PFBS 160 A1 User Manual download pdf (Page 13)

13 GB

General power tool safety warnings / Start-up Start-up

Use the combination wrench

to tighten the

screw on the clamping mandrel.

Bricks

Firmly secure the whetstone! Use a vice or equiv-

alent tool to prevent injuries.

When using the bricks for the ﬁrst time, they

must

ﬁrst be trimmed using the prismatic whetstone.

To do so, slowly bring the brick

to the whet-

stone with the tool switched on. Grinding the two

abrasive wheels together will remove uneven

areas in the contour of the brick. The whetstone

can further be used to shape the brick.

Installing sanding belts

Slide the grinding belt

onto the grinding

mandrel

from the top. Tighten the screw on

the grinding mandrel

to secure the grinding

belt

Attaching polishing tools

Screw the polishing tool

into the tip of the

mandrel for polishing attachments

Switching on and oﬀ / Adjusting

the speed

Switching on / adjusting the speed:

Set the ON / OFF switch

to position „I“ by

pressing down and sliding it forward.

Set the variable speed control

to a position

between „1“ and „6“.

Switching off:

Set the ON / OFF switch

to position „0“.

Information about processing

materials / tool / speed range

Use the router bits to process steel and iron at

maximum speed.

Determine the speed range for processing zinc,

zinc alloys, aluminium, copper and lead by

testing scrap pieces.

Process plastics and materials with a low melt-

ing point at a low speed.

Process wood at high speeds.

Clean, polish and buﬀ at a medium speed.

The following information are non-binding recom-

mendations. When performing the actual work also

test yourself, which tools and settings are ideal for

the material you are working on.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Comments to this Manuals

No comments

Parkside PFBS 160 A1 User Manual Page 13

Comments to this Manuals

Related products and manuals for Power tools Parkside PFBS 160 A1