Parkside PFBS 160 A1 User Manual download pdf (Page 14)

14 GB

Start-up

Examples of use / selecting the correct tool

Function Accessory Application

Drilling Drill bit

Wood applications

(see Fig. C)

Milling Milling bit

Various applications; e.g. recessing, hollowing

out, shaping, grooving, or making slots

Engraving Engraving bits

Marking

(see Fig. D)

Polishing, rust

removal

CAUTION!

Only apply the tool

to the work piece

under light pressure.

Metal brush

Rust removal

(see Fig. E)

Polishing tools

Processing various metals and plastics, particularly

precious metals such as gold or silver

(see Fig. F)

Cleaning Plastic brushes

e.g. cleaning hard to reach plastic housings or

cleaning the area around a door lock

Metal brush

e.g. rust removal

(see Fig. E)

(The metal brush is softer than steel)

Grinding Grinding discs

Grinding stone

Grinding bits

Grinding stone, detail work on hard materials such

as ceramics or alloy steel (see Fig. G)

Sanding belts

Sanding wood

Cutting Cutting discs

Processing metal, plastic

(see Fig. H)

Flexible shaft

Never use the spindle lock with the motor on.

The tool or the ﬂexible shaft could otherwise

be damaged.

Unscrew the union nut

from the tool, turning

counter-clockwise, and put aside.

Press and hold the spindle lock

Unscrew the clamping nut

from the tool,

turning counter-clockwise.

Attach the ﬂexible shaft to the tool, inserting the

inner axle on the ﬂexible shaft along with the

clamping nut

into the collet

First tighten the clamping nut

, then the union

nut

13 b

of the ﬂexible shaft

to the tool, turn-

ing clockwise.

Now insert the accessory you wish to use into

the collet

of the ﬂexible shaft.

To lock the spindle, slide back the black sleeve

on the ﬂexible shaft.

Using the combination wrench

, open the

collet holder

on the ﬂexible shaft, insert the

accessory and tighten the collet holder

Stretch stand for the multi-

function tool (Fig. I)

Screw the stretch stand

into the clamp

Note: The stretch stand

can be screwed

into the clamp in two diﬀerent positions, de-

pending on the whether you‘re attaching to a

horizontal or vertical surface.

Secure the clamp

at the edge of a work-

bench or a work table no thicker than 55 mm.

Start-up / Cleaning, care and storage / Warranty / Disposal

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Comments to this Manuals

No comments

Parkside PFBS 160 A1 User Manual Page 14

Comments to this Manuals

Related products and manuals for Power tools Parkside PFBS 160 A1