Parkside PWS 125 B2 User Manual download pdf (Page 5)

5

GB

The manufacturer is not liable for damages

caused by an improper use or incorrect

operation of this device.

General description

See the front fold-out page for

illustrations.

Extent of the delivery

Carefully unpack the appliance and check

that it is complete:

- Device

- Handgrip

- Protective hood

- Chuck key

- Cutting disc

- Instruction Manual

Description of function

The angle grinder is made for cutting,

scrubbing or brushing metal. There is a

special disc for each of the separate ap-

plications. Please refer to the information

from the disc manufacturer.

Please refer to the descriptions below for

information about the operating devices.

Overview

1 Handgrip

2 Threads for handgrip

3 Speed regulator

4 Switch block

5 On/off switch

6 Threads for handgrip

7 Spindle stop button

8 Power plug

9 Chuck key

10 Cutting disc

11 Protective hood

12 Mounting ange

13 Clamping nut

14 Mounting spindle

15 Adjustment nut

16 Tightening lever

Technical data

Angle Grinder PWS 125 B2:

Rated input voltage

............................... 230-240 V~, 50 Hz

Power input ............................ 1200 W

Idling speed (n) ............3000-12000 min

-1

Safety class ..................................... II

Protection category......................... IP 20

Sound pressure level

(L

pA

) ...............92,1 dB(A); K

pA

= 3 dB(A)

Sound power level (L

wA

)

measured .....103,1 dB(A); K

wA

= 3 dB(A)

guaranteed .....106 dB(A); K

wA

= 3 dB(A)

Vibration (a

h

)

Main handgrip 11,237 m/s

2

K= 1,5 m/s

2

Supplemental handgrip

......................... 8,146 m/s

2

K= 1,5 m/s

2

Cutting disc:

Idling speed n

0

................................... max.12200 min

-1

Disc speed ....................... max. 80 m/s*

Outer diameter ................... Ø 125 mm

Bore hole ........................ Ø 22,23 mm

Thickness ...................................3 mm

*

The grinding disc must keep a rotational

speed of 80 m/s.

Levels of noise and vibration were determi-

ned according to the norms and regulations

in the declaration of conformity.

Technical and visual changes may be made

as part of ongoing development without

announcement. All dimensions, instructions

and specications are therefore without

guarantee. Legal claims on the basis of the

1 2 3 4 5 6 7 8 9 10 ... 141 142

Comments to this Manuals

No comments